PWL-U707 Long Range Ultrasonic Level Sensor
The housing is made of NLEPF engineering composite materials, which is durable, corrosion-resistant, acid-resistant and alkali-resistant, good aging performance. The intelligent filtering algorithm design is adopted to effectively eliminate false echoes in actual measurements, improve the signal-to-noise ratio, and make the measurement more accurate.
It is widely used in tap water, heating, water conservancy, metallurgy, chemical industry, machinery, energy and other industries. It can be used for production detection, flow calibration, temporary detection, flow inspection, water meter horizontal debugging and energy-saving monitoring. It is an essential tool for timely detection of water level.
Features:
- Ultrasonic working principle, non-contact measurement method
- Less than 9°beam angle design, less than 200ms responding time
- NLEPF engineering composite materials, durable and corrosion-resistant
- Sun protection cover design, IP65/IP66 waterproof
- Intelligent filtering algorithm design, more accurate
- Simple installation with no calibration necessary
- Over voltage and over current protection
- Optional explosion-proof
| Specification | |
|
Model |
PWL-U707 |
|
Measuring Range |
5m, 10m, 15m, 20m, 30m, 40m, 50m, 60m |
|
Blind Zone |
0.25-1.2m (According to the range) |
|
Accuracy |
±0.5%FS(Typical), ±0.25%FS by customized |
|
Signal Output |
4-20mA/0-5V/1-5V/0-10V/RS485/RS232/Relay |
|
Power Supply |
24VDC/12VDC/220VAC |
|
Display |
With |
|
Resolution |
3mm or 0.1% (Which one is max) |
|
Working Temp. |
-20℃~60℃ |
|
Working Pressure |
2 bar |
|
Working Humility |
≤80%RH, no condensation |
|
Protection Level |
Sensor IP68, Indicator IP65 |
|
Cable Length |
10m as standard, max 100m |
|
Housing Material |
NLEPF synthetic material |
|
Installation Method |
Threaded |
|
Corrosive Application |
Yes available to customize PVFD or PTFE sensor probe |
