PWF-E1700 Insertion Electromagnetic Flow Meter

Datasheet download

Pokcenser Insertion Electromagnetic Flow Meter is composed of electromagnetic sensor and electromagnetic flow converter, used to measure the conductive liquid that electrical conductivity is greater than 5us/cm. It retains the advantages of pipeline electromagnetic flowmeter, and overcome it’s installation difficulties and higher cost for large pipes. In particular, after adopting pressure opening and pressure installation technology, the Insert type electromagnetic flow meter can be installed without water, and can also be installed on cast iron pipes and cement pipes. It is used to measure water, sewage, acid, alkali and other mediums. Suitable for measuring large pipe of DN300-DN3000mm. Widely used to municipal water supply and drainage, industrial engineering, hydraulic engineering, etc.

Applications:

• Municipal water supply and drainage 
• Sewage treatment
• Hydraulic engineering

Features:

• No moving parts, simple structure and reliable operation
• Installation without cutting off the water supply under the condition of low pressure
• Transducer has no pressure loss, very low energy loss
• Small volume and light weight, save on shipping cost and it’s convenient to install.
• Cost is less for product and installation than other electromagnetic flowmeters, especially large diameter pipes
• Advanced low frequency square wave excitation, no zero point drift, high disturbance resistant and reliable operation
• Wide measurement range. Full scale flow rate can be randomly set within the range from 1m/s to 10m/s.