PWF-U2000B Wall Mounted Ultrasonic Flow Meter
Ingress protection level: IP67 (transmitter), IP68 (sensor)
Wide measurement range, pipe size from DN15mm to DN6000mm.
Three installation types: wall mounting, DIN-rail mounting, explosion-proof box mounting
Could operate with temperature sensors for heat/energy measurement.
Could be installed without shut down equipment operation
PWF-U2000B ultrasonic flowmeter is used for long-term online measurement of various liquid flows. The converter protection level is IP67, sensor protection level is IP65/IP68. The converter and sensor are installed separately. The converter can be installed indoors/in the cabinet/on the panel. The sensor is installed on the measuring pipe. The converter and the sensor are connected with a special cable for ultrasonic flowmeters to achieve flow measurement. The temperature sensor can be connected to achieve heat measurement.
It is widely used in tap water, heating, water conservancy, metallurgy, chemical industry, machinery, energy and other industries. It can be used for production monitoring, water balance debugging, heat network balance debugging, and energy-saving monitoring. It is an important flow measurement instrument in the production process.
Features:
- Measurement accuracy 1%
- Converter protection level IP67, sensor protection level IP65/IP68
- Wide measurement range, pipe size from DN15 to DN6000
- Three installation methods: Wall mounted, rail mounted and explosion-proof box mounted
- Can achieve heat/energy measurement if with a temperature sensor
- Wide fluid temperature range -30~160℃
| Specification | |
|
Model |
PWF-U2000B |
|
Pipe Diameter |
DN15~DN6000mm |
|
Measurable Medias |
Water, seawater, industrial sewage, acid and alkali solution, alcohol, beer, various oils and other single and uniform liquids that can conduct ultrasonic waves |
|
Accuracy |
±1.0%FS |
|
Signal Output |
4-20mA/Pulse/RS485/Relay |
|
Power Supply |
DC8~36V or AC85~264V |
|
Display |
LCD |
|
Working Temp. |
Converter: -20~60℃; Sensor -30~160℃ |
|
Protection Level |
Transmitter IP67; Sensor IP65/IP68 |
|
Housing Material |
ABS |
|
Liquid Velocity |
0~±10m/s |
|
Power Consumption |
1.5W |
|
Sensor Installation Method |
Clamp on/Insertion type/Pipe section |
|
Transmitter Installation |
Wall mounted |
|
Cable Length |
2*5 meters |
|
Straight Pipe Request |
Upstream 10D, downstream 5D, 30D from pump. |
|
Heat/Energy measurement |
Available to connect 3-wire PT100 platinum resistor |
